Mar . 02, 2024 11:05 Back to list
Chlorinated Polyvinyl Chloride (CPVC) is the most popular piping material in the Kingdom of Saudi Arabia. Horonpipe® CPVC has been used around the world for more than 55 years, and specifically in the Middle East for more than 30.
CPVC’s primary competitor in certain parts of the KSA region is polypropylene (PP R) or green pipe. Relatively new to the market, PPR has left some homeowners, plumbers and traders questioning which is better for their home.
Our material scientists have collected research and findings from studies around the world to compare the materials side-by-side across 7 core categories.
With 60% greater tensile strength and nearly twice the flexural strength, CPVC is a stronger, more durable piping material than PP R. Due to its strength, CPVC can withstand more pressure, which means same flow rate with smaller pipes.
CPVC pipes and fittings are joined with a simple solvent cement welding process. Conversely, PPR systems are connected using heat fusion welding.
With solvent cement, CPVC piping system can be cost effectively installed:
In addition, CPVC pipe’s rigidity requires fewer hangers and supports to be used during installation and makes it the best material for vertical plumbing and risers. In contrast, PPR piping system installation can be costly and take longer since it requires special equipment and more skilled labor. Heat welding can also lead to bead formation around the inside of the pipe, thus reducing water flow rate and increasing chances for bacterial growth. Finally, it requires extra room to assemble, meaning parts of the system need to be prefabricated.
Chlorine and chlorine dioxide are often used as drinking water disinfectants. When chlorine and water mix, they can form hypochlorous acid, which is known to break down piping material.
CPVC pipe is subjected to a chlorination process, which makes it unaffected by the hypochlorous acid that is present in the potable water supply. This results in longer service life for plumbing systems.
When exposed to hypochlorous acid, PPR does not have the same defense mechanisms, leaving it susceptible to attack. This results in oxidation stress cracking inside the pipes and erosion of the pipe wall, leaving a thinner, weaker piping material.
Despite water disinfection, bacteria can still be present in your drinking water or hot water, and potentially grow on the inside of pipe walls. When using CPVC piping systems, the smoothness of the pipe surface and lack of plasticizers discourages microbial growth.
Multiple international studies, like the one conducted by research firm Kiwa, have confirmed the superior antimicrobial performance of CPVC piping systems compared to other piping materials, especially PPR.
In the chart below, KiWA found the number of Legionella bacteria in test water to be significantly lower than that of PPR.
Horonpipe® CPVC is approved for potable water applications by all major international agencies and holds an NSF 61 Annex G certification.
NSF/ANSI 61 focuses on cold water / drinking water piping system components and the corresponding health effects, with a specific focus on lead. It was established to control the potential adverse human health effects from products that contact drinking water.
Horonpipe Hot water CPVC
CPVC piping doesn’t support combustion. It requires 60% oxygen in the atmosphere to sustain a flame. Earth’s atmosphere is 21% oxygen.
To burn, the temperature would need to reach 480°C, and even then the material chars. This charring layer actually serves as a insulator, partially shielding the inner portion of piping material from the heat. CPVC has the lowest possible combustion rating for any non-metal.
When comparing combustibility with CPVC vs PPR, PPR has a limiting oxygen index of 18, making 3x more combustible than CPVC. In addition, the material will generate more heat and increase the risk of fire damage.
Pipe CPVC is lower in petroleum content than other plastic materials, including pipe PPR. This means that it takes less energy to manufacture. And the end of its service life, it can be reground into pellets and recycled into new piping, or transformed into things we’re surrounded by every day─floor fillings, floor coatings, speed bumps, car mats, and more.
Made with superior materials, Horonpipe CPVC Plumbing Pipes and Fittings are backed by more than 50 years of proven performance and provide safety, durability and reliability for cost-effective residential plumbing systems in the Middle East and around the world.
Have questions about CPVC vs PPR, or how CPVC can help with your next project? Contact the piping systems consultants at Horonpipe today.
use of pvc pipe service
NewsDec.13,2024
HDPE Pipe Solutions for Efficient Irrigation Systems and Water Management
NewsDec.13,2024
Custom Manufacturing of Double Wall HDPE Pipes for Various Applications and Industries
NewsDec.13,2024
hdpe pipe size chart service
NewsDec.13,2024
ppr pipe vs pvc pipe factories
NewsDec.13,2024
Discounted Orange PVC Pipes for Various Applications and Uses
NewsDec.13,2024