Bending PVC pipe is becoming more common for projects around the house. Before we tell you how to bend your piping, we want to be clear that you should not use bent PVC pipes for fluid conveyance. If you bend PVC, it should not be used in any plumbing application. As an alternative, you can find flexible PVC pipe here.

The trick is to fill it with sand before heating the plastic and bending it. Normally, the pipe would pinch closed in areas where it is bent, but the sand prevents that. When the heat forming is finished, you just drain out the sand.

Have you ever found yourself putting in that new sprinkler system for your garden and right in the middle of the project discovered that you are out of 45 degree fittings? With this simple technique, you can heat bend custom fittings in any kind of PVC pipe.

Because of its strength, resistance to wetness and electricity and low cost, PVC piping is a commonly used material with many applications. Home uses include installing plumbing, internal cable wiring and gardening. It’s also great for DIY projects like making a custom storage unit or lawn furniture, or building a makeshift gazebo tent.

The easiest tool for bending PVC pipe is a heat gun, though a flaming torch works if you are careful with charring the surface.If you only want to melt the PVC enough that it is pliable, a heat gun will work. If you want to melt it enough to mold shapes, you’ll need a double boiler. A heat gun of 1500 watts costs around $25. You can even use the stove top or hot water.

There can be a variety of reasons to learn how to bend PVC pipe or conduit. It can be quite artistic and can be used as artwork. It can also be used as support for other items. As an electrician, I have installed miles of PVC conduit underground, and it always needs to be bent at one point or another. Elbows or other pipe fittings won't work for conduit because wire cannot be pulled through them—a gentle, sweeping bend is necessary.

PVC (polyvinyl chloride) pipe is a type of plastic tubing commonly used for drains. These are the white pipes with purple primer often seen in residential basements. Ambitious DIYers attempting a kitchen or bathroom renovation, as well as those who like to tackle their own plumbing repairs, will likely have to work with PVC pipe. Moving a shower, sink, or toilet—even simply replacing a rusty sink trap—will require some PVC know-how.

To cut PVC pipe, all you need is one of the many tools for the job. PVC pipes are one of those things that provide many uses for anyone willing to give them a chance. They can be used for practical and recreational projects.

PVC was one of the first plastics ever invented. Discovered in 1872 and first available commercially in the 1920s, this durable plastic has seemingly endless applications.

So, you need to cut PVC pipe, but you can’t get a saw in the tiny gaps of space around the piping. You might be shocked to find that you can make the cut with a nylon string. Other materials such as cotton will not work. The makeup of the nylon string works best with friction to cut through PVC.

Much of the plumbing in your home is made up of PVC, ABS, and CPVC plastic pipes. Although each type of pipe has its own uses and specifications, they require similar tools to cut and install.

Cutting PVC is easy, unlike wood or steel. You can even cut it with standard tools. But if you need to cut in a large amount. Then what way Should you choose? Of course, the Miter Saw.

When working with PVC plastic and concrete, sometimes we want the PVC to adhere to the concrete. And other times, there is a strong desire to have the PVC not stick to concrete. Before one begins, it is likely to be asked, ‘Does Concrete Stick To PVC Pipe?’

Before going into the specification let’s make ourselves clear what each material is made up of. PPR is the short-form for Polypropylene Random Copolymer while CPVC is Chlorinated Polyvinyl Chloride is produced by a process of chlorination to Polyvinyl Chloride.

PPR pipe is a copolymer made of propylene monomer and ethylene monomer and is one of the most energy-saving and environmentally friendly plastic pipe products. As an emerging material, PPR pipes must have advantages and disadvantages. This post will take you through the advantages and disadvantages of PPR pipes.

The importance of having clean water cannot be overstated. Water contamination can lead to several health issues, some are even life-threatening. When considering piping choices, it is, therefore, important to choose the right material. To prevent contamination of the drinking water, good quality drinking water pipes should be used in a well-planned and designed water distribution network. Here are some common kinds of pipes used for drinking water:

When you’re getting ready to start a new residential or commercial project, you’ll discover that there are numerous plastic water pipe types that you can use. These pipes can be separated into copper, plastic, and composite categories. The ideal pipe for your project depends on the application it’s being used for.

Chlorinated Polyvinyl Chloride (CPVC) is the most popular piping material in the Kingdom of Saudi Arabia. Horonpipe® CPVC has been used around the world for more than 55 years, and specifically in the Middle East for more than 30.

We all want our family to be safe and protected… And when it comes to drinking water, installing the best plumbing system is one of those things that is always the number 1 priority. Like many, if your search engine is also loaded with the best plumbing system for drinking water, this blog will help you finalize the best piping solution for your needs.

There are a number of things to consider while choosing sanitary pipes and fittings for hot water supply. The material used in the pipes and fittings is the first and most crucial factor. The material should ideally be corrosion-resistant, able to handle high pressure and temperatures, and suitable for use with drinking water.